When computers and peripherals are switched on, installed wireless network adaptors typically start searching for suitable signals within 60 seconds. They tend to search for networks anytime power is supplied to them, even if they have been disabled in Software.
To temporarily disable wireless capability via software,
computers may make use of a Function (Fn) key, usually blue, and the F2
Function button. Multiple presses of F2 (or whichever key has the wireless icon
on it) while pressing the Function (Fn) key will typically step through the
wireless options: Wireless LAN, WLAN & Bluetooth, Bluetooth, All Wireless
Off.
Turning All Wireless Off should be done routinely when
wireless is not required to reduce exposure of those nearby to microwave (RF) electrosmog
and to save battery life. To minimise exposure further, computers should have
their wireless adaptor(s) permanently removed or have their wireless adapters also
disabled in ‘Hardware’. The latter typically involves disabling the device
driver via Control Panel.
Disabling Wireless in Hardware:
(Windows XP. Similar in Windows 7)
Left Click Start
Control Panel
System
Hardware
Device Manager
Network adaptors - select wireless adaptor (802.11b/g/n Bluetooth)
Right Click Disable
Left Click to Accept
BT Home Hubs (V2.0) and others that incorporate a Cordless (DECT)
Phone Base Station may not allow the cordless transmitter to be turned off. Upon
representation, BT may be willing to substitute a v3.0 which does support this
feature if, for example a v2.0 ‘no longer works’ or if the user states that
they cannot tolerate it due to ‘Electro-Sensitivity’. BT FON routers as
supplied now default to opt-in so straight out of the box your home will become
a wireless hot-spot.
To minimise wireless exposure to everyone in the vicinity (typically a 300 metre radius) LAN
10/100 network cables should be used instead. Local Area Network (LAN) cables enable Internet connections to be shared between computers
and other LAN enabled devices using simple
inexpensive plugged-in Ethernet Mini-Hubs or Switches. They are typically a faster and more secure way of interconnecting computers and accessing the Internet.
Similarly, peripherals such as printers may also be
wirelessly enabled and should be hard wired (via a USB port) and their wireless
capabilities disabled. Check Operating Manuals for how that can be achieved as
many now default to wireless or are programmed to require wireless to be
enabled to access some features and upgrades.
1 comment:
Thank you for this. I've often wondered how to accomplish this, have performed google searches, but came up empty. It's very easy on a mac, but not at all clear on a pc--to know if it's searching for wifi, and if so how to stop it. So much appreciated!
Post a Comment